We all know that the engine oil separator is an important part of the excavator parts, excavator in Anhui if the oil-water separator problem will lead to abnormal engine smoke digging machine and deposit on the valve and the power of the engine down a series of failures may lead to serious engine damage, so it is very important to the maintenance of normal oil-water separator. Today make up and you talk about the excavator engine oil-water separator proper maintenance method.

Problems occurred in the oil / water separator of excavator engine:

1, engine smoke exception

2, excavator engine valve carbon

3, excavator engine power down

4, excavator engine damage

The above said the oil and water separator excavator engine damage will appear what problem, then, Guizhou excavator we want to say is how to correct the engine oil and oil separator for the maintenance.

One, water.

I believe many of my friends on the oil-water separator drain is not strange, below the oil-water separator drain valve open, then drain the water clean. And the oil-water separator with the function of automatic drainage is more simple, as long as the alarm signal, you can press the button on the cab to turn on the water, the water discharged automatically close the drain valve, which can to ensure the timely discharge of water in oil-water separator.

But the water is not as simple as we think, Anhui is also a lot of water to be in need of attention.

1 to timely.

Daily routine maintenance, to see the oil and water separator, if there is too much water or more than the warning line, we will promptly release the water.

2 drainage is regular.

First, the fuel consumption is complete, this time need to water in the oil and water separator in a timely manner. Second, it is to replace the fuel filter, it is also timely to the oil and water separator in the timely discharge.

Don't forget the 3 after the water filling.

When the oil-water separator drain, must remember to perform injection pump oiling operation until filled with fuel pump.

Two. The heat preservation of oil and water separator in cold weather.

1 to the oil-water separator with a thick coat. In the northern region, some users in order to prevent the oil-water separator was frozen, the oil-water separator heat treatment, which is wrapped in a layer of insulating material.

2 with electric heating function of oil and water separator. This can not only prevent the oil and water separator, but also can prevent the diesel oil.

The oil-water separator as an excavator engine component, it plays a role to improve the quality of diesel fuel, which is also the high pressure common rail engine is needed. The oil-water separator if there are problems will lead to abnormal engine smoke and deposit on the valve and the power of the engine under the drop and a series of failures, may lead to serious engine damage, so that it is important to maintain the normal oil-water separator.